NUVAP SUPPORT TEAM
How can we help? Below are quick answers to the most common questions we get asked. Or you can email our support team.
EMAIL NUVAP SUPPORT
Any questions about Nuvap N1? We have the answers and plenty of resources to help you out.
Download the PDF version of Nuvap N1 User's Guide and the Colorimetric Comparison Chart for Water Quality Analysis, now available in the following languages:
Italian - English - German - Russian
Click here to download the PDF version of Nuvap N1 Multilingual User Manual (condensed version).
Download the PDF version of the Quick Start Guide to easily set up your Nuvap N1.
When N1 is switched on it makes a series of electronic tests on all sensors. It is a necessary procedure in order to receive meaningful readings of the detected parameters.
Yes, it is. N1 indicates that is carrying out the measurements of the parameters correctly and that the monitored area is safe. This function can be disabled via Nuvap App (see Manual &Self Test).
We recommend placing N1 in the place of your home / office where you spend most of your time, for example in the bedroom, in the kitchen or living room.
During a punctual measurement you can place your N1 wherever you wish in order to get a specific measurement of the chosen area.
Follow the instructions in the instruction manual (& Setup) supplied in the box with N1device.
Our Nuvap App is available at Apple App Store and Google Play Store.
Our Nuvap N1 device can properly function even if it is not connected to a WiFi network. In this case, however, it will not be possible to obtain real-time detailed information about the measurements made through the platform or Nuvap App. N1 will only work locally: when tapping the touch key on the top of N1, a voice message will announce the quality of the environment monitored.
In the absence of a WiFi connection, Nuvap N1 will store a history of measurements for seven consecutive days. Simply by making a connection to a WiFi network you can upload the data recorded by N1 to the Nuvap platform and look upthe data acquired during the previousweek.
No, it isn't. Nuvap N1, as any electronic device which is not specifically waterproof, is delicate and the contact with liquids may prejudice functioning.
In continuous measurement mode, Nuvap N1, in case of increase of one polluting parameter, it immediately notifies the user both locally, by issuing a voice message and a light signal, and through the App if you have a WiFi connection. Only in this case you can see the details of the measurements made in the monitored area.
Access to our Nuvap platform is totally free of charge for the first 24 months after purchasing N1, provided that it is always connected to the Nuvap platform through a WiFi network. If N1 is turnedoff for more than 90 consecutive days, access to the platform is suspended. In this case, and after the first 24 months of using N1, you can re-enable access to our Nuvap platform.
If you encounter a malfunction or failure of your Nuvap N1 device please refer tothe website: www.nuvap.com/support
Unauthorized repair could void the product warranty.
Nuvap N1 should be placed away from electromagnetic sources (see Manual & INSTALLATION).
Our device N1 is equipped with an internal memory that allows it to keep the data of the last measurements. In case of blackout the measurements will not be lost.
No, it isn't. Nuvap N1 currently has the possibility to select the language but not the kindof voice.
Nuvap N1 is associated with a single account. But you can also show the data measured by your N1 to friends or relatives via Nuvap Plattform simply by sharing with them the data of your N1.
To reset Nuvap N1 just press and hold down the touch key placed on N1 until the device beeps. We advise to reset Nuvap N1 in case of malfunctions or changes in the settings of the WiFi infrastructure.
If you experience problems operating Nuvap N1 (flashing blue LED or device failure) please consult our user manual (& Instructions for Use) or visit www.nuvap.com/support to solve the problem.
For support during the first configuration consult the user manual (& Instructions for Use) or visit www.nuvap.com/support to solve the problem.
There are some good construction criteria which prevent getting too close to an antenna. The distance is calculated on the basis of the characteristics of the antenna itself, generally a few dozen meters. One should also take into account the fact that the worse the signal reception the more power is used for transmission. Therefore, an antenna farther away is not a guarantee of lower exposure.
The criteria for installing antennas is to place them on the highest points in order to maximize coverage and minimize the number of obstacles encountered by the field along its path. If an antenna is installed on a building, creating a situation in which one or more apartments in the adjacent building are in the direction of the emission, field values inside the house will probably be higher than those measured under the antenna, but still below values of concern imposed by law and which have to be respected.
Satellite dishes serve exclusively for reception and consequently only pick up electromagnetic fields of very low intensity from satellites which are already present in the atmosphere regardless. These antennas are regulated mainly for aesthetic aspects, in some cases even in apartment building regulations. A Wi-Fi antenna placed on roofs usually generates an electromagnetic field relevant only in the first few meters around the antenna, which is usually located in places that are not reachable, and around which people cannot station.
The old type of computer monitors (CRT) produce very low frequency magnetic fields: these fields - present only when the monitor is running - are usually a bit more intense on the back and become very low when you station at more than 1 meter distance. For television sets the situation is quite similar: the latest monitors, no longer have the magnets which drive the cathode ray tube and therefore produce much lower EMFs. For all household appliances we can expected magnetic fields of significant mains frequency only within a meter from the appliance.
Although this type of installations may employ transmission power that is not negligible, they are used as a hobby and generally very sporadically. Unlike, for example, commercial radio stations that operate constantly over 24 hours, ham radio installations transmit in time frames of minutes or sometimes never in a whole day. Therefore, in terms of overall exposure, they do not constitute great concerns as instead other fixed sources of radio transmission. For more information and inspections contact theDepartment of Communications Inspectorate.
Any system whose operation depends on electricity may be affected by the action of electromagnetic fields in the environment and thus suffer interference. Malfunctions related to interference of electromagnetic fields pertain primarily to the manufacturer and are regulated by technical rules of so-called immunity and electromagnetic compatibility that equipment placed on the market should respect. In general, given the extreme susceptibility and sensitivity of electronic equipment to electromagnetic interference, the fact that such phenomena occur, in itself, does not imply that there are corresponding problems inherent to human health. In case the interference problems persist and concern the TV set, if the systems are compliant and certified, you can report the problem to the authorities responsible for your area.
There are electrical safety standards which provide for minimum distances in order to avoid risk of shock or electrocution. As far as compliance regarding exposure limits goes, it is not possible to identify, in advance, a distance that is applicable to all power lines present on the territory, because the levels of induction depend, in addition to distance, on the geometric conformations of the conductors and the current flowing inside the cables. Only after a thorough inspection (with measurements and theoretical estimates) it is possible to answer this question.
It is the space surrounding a power line that includes all spots characterized by a magnetic flux of intensity greater or equal to the quality target. Within that portion of territory, housings, schools, hospitals cannot be built, that is, places where one can stay for over four hours. This concept applies to both new buildings near existing lines, new power lines compared to existing structures. For new constructions, it is the company operating the power line that has the task of determining the buffer zone, or distance, from power lines.
This phenomenon is attributable to micro-discharges that occur at the point where the cables are closer to the support structures (insulators). Atmospheric dust, or salt, which is deposited on the insulators generate this phenomenon, which can also cause real electric shocks (and the power line goes out of service). Periodic cleaning of the insulators avoids the danger of such discharges and reduces the noise produced by them. If the buzz is very disturbing, Municipalities can ask the line operator to have the insulators cleaned. In recent times (especially near the coast) providers are replacing glass insulators with new ones made of composite material. These new insulators are designed precisely to prevent dust deposit, thus drastically reducing the noise from power lines and avoid discharges. This phenomenon, related to the line voltage, can be more or less accentuated depending on atmospheric conditions (for example in particularly wet conditions the phenomenon is accentuated) and has no correlation with the levels of electromagnetic induction produced by the line.
In order to avoid misinterpreting regulations, you cannot carry out magnetic induction measurements at the site. Instead you need to acquired a DPA (NEAREST APPROACHING DISTANCE) by power line provider and you have to adapt the design of the new facility to that distance.
Normally the main source of Radon is the soil (Figure 3.1). Depending on the mechanisms of Radon diffusion from the soil, the rooms located in the basement or on the ground floor are usually those that are particularly affected. Generally Radon gas, being a heavy gas, can get to the first/second floor of homes/offices. In certain cases, however, also the use of certain lava, tuff, pozzolan and certain granites used in construction or in interior decorating, as well as the presence of spring waters with high Radon content, can help to increase the concentration of indoor Radon. In this case medium to high concentrations of Radon are not necessarily present on the lowest floor, but could relate to the environments in which these materials were used or water is used.
In any case it is always advisable to monitor rooms with your Nuvap N1.
Radioactivity in the environment can be both manmade and natural: the biggest dose absorbed annually by each individual comes from natural radioactivity, which is responsible for about 80% of the total.
There are many published studies which confirm that exposure Wi-Fi waves over time (like the ones you can get when you sleep) can be detrimental to human health. However, since these technologies have been introduced into the market only recently, it is difficult to ascertain with certainty the potential damage that may arise in the population after exposure to this type of electromagnetic waves over time: that is why it is a good idea to limit your exposure to Wi-Fi waves.
Normally the amount of carbon monoxide produced from these sources is not a cause for concern. But if the devices are not kept in good condition or if they are used in an enclosed or poorly ventilated space, such as the car in a closed garage, carbon monoxide can reach dangerous levels.
Even smoke inhalation during a fire can cause poisoning by carbon monoxide.
Symptoms of carbon monoxide poisoning may include:
Poisoning with carbon monoxide can be particularly dangerous, often, in fact, death occurs before one notices the presence of gas.
If you suspect of being exposed to carbon monoxide, let fresh air in and seek medical assistance immediately.
IMPORTANT! At the first signs or symptoms of carbon monoxide poisoning, such as headache, dizziness, nausea, vomiting, chest pain, confusion, let fresh air immediately and promptly seek help.
You will have to provide Hospital staff with all possible details about gas exposure, that is:
Methane gas is not toxic in itself, but during combustion (like all fires involving also other substances) consumes the oxygen present in the room and forms gases, mainly carbon dioxide and carbon oxide (very toxic). If the room in which methane combustion occurs is small and insufficiently ventilated, very soon it will consume all the oxygen in the air which will not be breathable any longer, posing a risk of death.
Always! For new system installations, for all modifications, extensions, changes and routine and/or extraordinary maintenance, but also when just connecting a gas cooker.
No, only those installers who meet all necessary requirements. They must possess the authorization that enables them to work on installations for the distribution and utilization of any type of gas, including evacuation of combustion and ventilation products and room aeration.
Natural gas is usually called methane because this gas constitutes more than 90%. On house but also industrial installations, it is common to find signs saying methane, for example on gas meters or on pipelines. In all these cases the gas flowing inside is definitely natural gas.
Exposure to particulates over time can be very harmful. Typically, asthma, cardio-pulmonary diseases and the decrease in pulmonary function are considered diseases related to particulate matter. The World Health Organization, based on a study conducted in the year 2000 in eight cities worldwide, estimates that particulates are responsible for 0.5% of global deaths registered during that year, responsible in the U.S. alone for 22,000-52,000 deaths per year . In Europe it is estimated that particulates have contributed to about 370,000 premature deaths in 2005.
Nuvap wants to provide everyone with a tool to check the quality of water that comes out of the tap. Despite the fact that the authorities managing the water service carefully check the water that is distributed, it may be subject to alterations simply when passing into the water pipes of our homes (which are often not checked). With Nuvap kit residents have an easy do-it-yourself tool for analyzing water. Although the kit does not provide for complete and certified analysis, it allows you to check the most important parameters of drinking water (pH, hardness, content of nitrates, nitrites, chlorides, etc.) and to have an indicative evaluation of its quality. With Nuvap kit, for example, you will know the content of chlorine in water, protecting yourself, your pipes and appliances from corrosion and fouling.
Analyzing tap water once/twice a year is usually enough to have its quality under control. Only in response to specific situations it can be useful to analyze it more frequently, for example after a job is done on the pipes of your home or on the main water supply, or if the house is located in the vicinity of lakes. Nuvap kit supplies 6 measuring tools, and refills can be purchased from the website at a very low cost.
The colorimetric strips to perform the tests are sensitive to both high temperatures and light. For this reason, it is advisable to keep test tubes sealed in their packaging and in places that are not too hot or humid until use.
In general, the authorities that manage the distribution of water periodically inspect it carefully. However the quality of water distributed may be affected by the state of water supply of private homes or of any collecting systems as caissons, wells, etc. Old or damaged pipes can release substances into the water that are harmful to health or contaminate the water network with percolating ones. Tanks, wells, caissons not regularly checked can alter water both chemically and microbiologically.
With Nuvap kit you can analyze any type of water intended for human consumption, but you cannot certify drinkability; that task is for public institutions in charge of carrying out extensive checks from the spring to the distribution network.
If the analysis found slightly higher values in comparison to the parameters set by law you should carefully read the instructions on the chart included in Nuvap N1 manual, because sometimes just simple measures can improve the quality of tap water. In some cases it is possible to adopt a system of domestic water treatment: from simple filtration systems up to equipment for reverse osmosis. In the event that the values found are well above the legal limit you'll want to re-run the test to confirm the result and then contact Nuvap support to perform in-depth laboratory analysis.
In general, filtration systems currently on the market (with active carbon, ion-exchange resins, etc.) are simple systems that often allow you to eliminate particulates and some undesired compounds like chlorine and certain ions. It is still fundamental a correct and thorough maintenance in order to maintain the effectiveness and reliability of such systems. Improper maintenance may in fact also lead to a deterioration of water quality. Among the best practices we emphasize the importance of respecting the timing for replacing filters and, in the case of pitchers, using them daily and storing them in the refrigerator. By using Nuvap kit you can find the filtering system which best suits the characteristics of your water and also evaluate its effectiveness.
Often these systems are bought without first checking the quality of water that reaches the tap. Using a filtering system when water parameters are according to the law, therefore filtering water of good quality, it can mean impoverishing water of certain substances required by our body (e.g. minerals). So, even in case you already have a filtering system it may be useful to analyze your water in order to verify its suitability.
The effects of noise on humans are varied and can be distinguished in:
Scientific research like the one conducted by Mette Soerensen from the Institute of Cancer Epidemiology in Copenhagen on 51,485 people, shows that exposure to traffic noise, in fact, increases in a decisive manner the risk of stroke in people over 65 years of age. The team of Danish researchers found that for every extra 10 decibels of noise, the danger increases of 14%. Overall, 8 percent of all stroke cases, and 19 percent of those over sixty-five years of age are due to noise pollution caused by traffic.
The excess moisture generated by condensation, rising damp, infiltration, damp walls, the presence of mold, dust mites and other pests can cause serious respiratory infections. People most at risk are those most vulnerable (children, adolescents, the elderly), who will show the first symptoms.
The World Health Organization has provided guidelines on air quality. The research lasted two years and was based on an analysis of 36 international studies, developed by leading experts in the field. According to the analysis, those who live in damp buildings or with mold are 75% more likely to have breathing problems such as asthma, rhinitis and allergies. Molds are toxins that can alter the immune system. It is estimated that in Europe 20-30% of all buildings have this problem.